Promise VTrak J300s
| Výrobce: | Promise |
| Kód zboží: | 00020623 |
| Product number: | |
| Záruka: | 36 měsíců |
Tento produkt se nachází v kategorii filtru: výrobce Promise
12 hot-swappable drive bays in a robust 2U chassis, supports Serial Attached SCSI (SAS)/SATA 3Gb/s drives simultaneously, dual active/active SAS JBOD I/O modules, three 3Gb/s SAS 4x external ports; two host ports and one SAS expansion port for cascading JBODs
1
2
3
4
5
skladem: 0 ks
1 899,580 EUR
2 298,490 EUR včetně DPH
Cena elektrického zařízení obsahuje recyklační poplatek v souladu s ustanovením § 37h odst. 3 zákona o odpadech a autorský poplatek.
JBOD I/O Module Features
I/O Modules
Drive Support
External I/O Ports
SAS Features
SAS Standards
Command and Protocol Support
PHY Capability
Expander Function
Management Function SAS Topology Discovery
System Management
Supported Operating Systems
Management Interfaces
Management Protocols
Mechanical Specifications
I/O Modules
- Single JBOD I/O module, upgradeable to dual active/active JBOD I/O modules support failover/failback
Drive Support
- Up to twelve 3.5” x 1” hard drives:
- SAS 3Gb/s;
- SATA II 3Gb/s and 1.5Gb/s -- direct connect in single I/O module configuration or uses the Promise SATA MUX Adapter** in dual I/O module configuration
- Supports any mix of SAS and SATA II 3Gb/s or 1.5Gb/s drives simultaneously in the same system
External I/O Ports
- Three 3Gb/s SAS ports using industry standard 4x wide-port SAS connectors, two for host connections and one for JBOD cascading
SAS Features
SAS Standards
- ANSI T10 SAS 1.0 and 1.1 Compliant
Command and Protocol Support
- SSP – Serial SCSI Protocol
- STP – SATA Tunneling Protocol
- SMP – SAS Management Protocol
PHY Capability
- All ports self-configuring operation at 1.5Gb/s and 3Gb/s
- Automatic speed detection/negotiation
- Programmable output pre-emphasis
- Programmable input signal equalization
- Programmable voltage swing levels
- Wide port support
Expander Function
- ECM – Expander Connection Manager: Table, Direct and Subtractive Routing
- ECR – Expander Connection Routing: Any to any port crossbar switch; Concurrent connections between host ports and target ports; Wide port configuration
- BPP – Broadcast Primitive Processor: Receive and forward broadcast request from source port to all other ports
Management Function SAS Topology Discovery
- SMP – SAS Management Protocol; In-band access to Expander and PHY information; Statistics counters and performance monitors
- SES EM – SES Enclosure Management: SCSI SES command set over virtual SSP device
System Management
Supported Operating Systems
- Windows 2000, Windows 2003, Linux (Red Hat, SuSE)
Management Interfaces
- In-band SAS and out-of-band RS232 serial port
- Extensive CLI through RS232 serial port
Management Protocols
- SES over SAS ports
Mechanical Specifications
- Current 8 A @ 100 Vac; 4 A @ 200 Vac (current rating with two power cords)
- Power Consumption 470 watts (under load)
- Power Supply Dual 360W, 100-240 Vac auto-ranging, 50-60 Hz, dual hot swap and redundant with PFC, N+1 design
- Thermal Output 1604 BTU/hour (max current)
- Operating Temperature 5°~40°C (-40°~60°C non operational)
- Relative Humidity Maximum 95%
- Vibration Random, 0.21 grms, 5-500Hz, 30Mins, X, Y, Z axis
- Dimensions (H x W x D) 8.8 x 44.4 x 56.1 cm (3.5x17.5x 22.1in)
- Net weight (system only): 26 kg (57 lbs) without drives, 32 kg (71 lbs) with 12 drives*** Gross weight (including carton): 29kg (64 lbs) without drives
- Safety CE, FCC Class A, VCCI, MIC, C-Tick, cUL, TUV, BSMI, CB
